THE DENTAL AWARDS 2025 – REGISTER NOW!

Meeting patient expectations using a combination of indirect and minimally invasive direct techniques.

Featured Products Promotional Features

  Posted by: Dental Design      15th August 2020

Daniel Caga is an associate dentist at 606 Dental Practice in Solihull. He shares his first full-arch rehabilitation case.

 

A 72-year-old female patient was referred in-house for a restorative consultation. She disliked the aesthetics of her crowns, particularly the noticeable black stained margins and metal-ceramic crowns. The patient did not report any significant pain, but had noticed occasional sensitivity associated with her anterior crowns.

Comprehensive medical and dental histories were taken. The patient suffered from urticarial vasculitis and coeliac disease. Her medication included methotrexate, prednisolone, alendronic acid, hydroxyzine, omeprazole, desloratadine, adcal and folic acid. The patient was a regular attender to the dental practice, brushed twice daily with an electric brush using a fluoridated toothpaste. She also attended the dental hygienist every six months and used interdental cleaning aids such as floss and brushes.

The patient was a non-smoker, drank minimal units of alcohol weekly and had a balanced diet with a reportedly low sugar intake and fizzy drink consumption.

Clinical assessment

An extra-oral examination did not reveal any significant issues. A low lip/smile-line was noted. Clinical photographs were taken after consent was gained.

The intra-oral examination revealed very good gingival health with a BPE of 101*/1*21*. Obvious gingival recession was noted around the crowns, though no current issues were revealed whilst examining the soft tissues. The patient also had a heavily restored dentition, with a mixture of gold, metal-ceramic and all-ceramic crowns on all of her upper teeth except the  upper left first permanent molar (UL6), as well as the lower right first permanent molar and premolars (LR654). 

There was evidence of tooth surface loss (TSL) on the lower anteriors (LR321 and LL123) and marginal breakdown was noted throughout the upper arch, mainly affecting the anterior crowns with questionable carious margins. Periapical radiographs of the upper arch were taken. No obvious apical pathology was noted and the upper left second permanent premolar (UL5) had a stable, well-condensed root filling in situ without evidence of recurrent infection. Slight horizontal bone loss was noted but this was not significant. Marginal defects were also recorded radiographically around the crowns. The intra-oral clinical photographs demonstrated a shifted centreline.   

A comprehensive occlusal assessment was then conducted, which highlighted:

  1. A Class III incisor relationship nearing an edge-to-edge relationship was recorded, with a reduced overbite and overjet. The UL6 was non-functional.
  2. The fabrication of a Lucia Jig made from Trim (Bosworth Company) helped to deprogram and relax the TMJ.
  3. Gothic arch tracing was recorded showing the position of centric relation (CR).
  4. A minimal slide from retruded contact opposition (RCP) to intercuspal position (ICP) was noted for both the horizontal and vertical components.
  5. Bimanual manipulation was used after the Lucia Jig and the patient repeatedly reported the first contact to be around the UL34 region, which was marked with articulating paper.
  6. Assessment of the dynamic occlusal movements highlighted:
    1. Anterior protrusion associated with bilateral posterior interferences on the LR7 and LL7.
    2. Group function during right lateral excursion involving the UR76 and LR765 with an absence of non-working side interferences.
    3. Group function during left lateral excursion involving the UL45 and LL45, which was associated with non-working side interferences involving the UR765 and LR765.

Diagnoses and treatment options

The patient was diagnosed with:

  1. Plaque-induced gingivitis.
  2. Localised TSL associated with either a potential parafunctional habit or attrition/abrasion between the upper crowns and opposing natural dentition.
  3. Marginal breakdown of the upper crowns – especially the anterior crowns with potential carious margins.
  4. The absence of a mutually protective occlusal scheme.

All possible treatment options were presented to the patient and discussed in detail. These were:

  1. Accept current situation with no treatment – the patient was not keen on this and it was not advised.
  2. Dental hygienist appointment to provide cleaning and preventive advice.
  3. Replacement of only marginally broken-down crowns that were deemed potentially carious. Replacement of the UR3-UL3 was discussed here, but the patient was not keen on this approach as it did not improve her aesthetics.
  4. A more complex treatment plan involving replacement of all the maxillary crowns, alongside treatment of the localised TSL on the mandibular anterior teeth with direct composite build ups, following a reorganised approach in an attempt to improve the occlusal scheme.

The patient was happier with option 4 as this fully addressed her cosmetic concerns.

To optimise aesthetics and avoid metallic restorations, lithium disilicate Emax (Ivoclar Vivadent) crowns were chosen. We also decided to leave the UL6 alone as it was non-functional and not overly apparent in the patient’s smile. 

Treatment planning

Before treatment could commence, hygiene therapy included ultrasonic cleaning and preventive advice. Alginate impressions were taken in metal trays along with a facebow registration and CR-bite record. Casts were mounted in CR on a semi-adjustable articulator and two sets were produced; one for a pre-operative record and another to be used for the diagnostic wax-up. This diagnostic wax-up was duplicated into a cast when accepted and an incisal index was made to copy the anterior slide.

However, the limited anterior space made it very difficult to generate a mutually-protective occlusal scheme and, therefore, group function during lateral excursion was accepted. The patient was made aware of this and the need for a hard or soft splint following treatment. 

During this planning stage, the patient fractured her UL1 crown to gingival level and was due to go away within the following five days. An immediate overdenture was made for the patient to use over this holiday period and the following treatment options were discussed at her return:

  1. Root canal therapy followed by restoration with a post-crown.
  2. Extraction of the UL1 and replacement with the immediate denture.
  3. Extraction of the UL1 and replacement with a bridge.
  4. Extraction of the UL1 and replacement with an implant-crown.

The patient did not want to save the tooth as this was quite unpredictable. Furthermore, she did not wish to have a removable prosthesis, nor undergo any implant surgery, and accepted option 3.

The final treatment plan therefore involved hygiene therapy, replacement of the upper crowns, direct composite lower anterior restorations and provision of an occlusal guard.

Treatment provision

Treatment was delivered across 13 appointments.

 

Appointment Treatment provided
1 ·    Facebow registration

·    Opposing arch alginate impression

·    Sectioning of the UR321 and UL23 crowns

·    Caries removal

·    Venus Pearl composite (Kulzer) core placements where needed

·    Extraction of the UL1 retained root

·    Impressions for laboratory temporary crowns/bridge

·    Temporisation using a pull-down splint based on the diagnostic wax up

2 ·    Fit of the laboratory-fabricated temporary crowns/bridge
3 ·    Direct composite build-ups on the LR321 and LL123. This involved rubber dam isolation, etching, bonding and placement of composite using a Mylar strip and PTFE tape
4 ·    Facebow registration

·    Sectioning of the UR765

·    Bite of preparations

·    Temporisation and Riva glass ionomer cement (SDI) placed on left-hand side crowns to keep them in the bite

5 ·    Fit of the laboratory crowns on the UR765
6 ·    Sectioning of crowns on the UL45

·    Bite of preparations

·    Facebow registration

·    Temporisation

7 ·    Fit of laboratory crowns on the UL45

·    After a period of 6-8 months in temporaries, which allowed for any over-eruption and re-emergence of the posterior bite (accepting that the UL6 would remain non-functional), the patient returned. During this period, no significant issues were raised by the patient regarding her bite or her TMJ. The UR7 temporary crown had fractured once due to it originally being a gold crown preparation, so its preparation was adjusted and a new temporary crown made. All other temporary crowns and composites remained sound. The occlusal scheme was deemed stable and, therefore, we could aim to conform to this when providing the definitive restorations. ‘We’ (the patient, patient’s husband and I) visited the laboratory to discuss with their ceramist the design of the final protheses and how we wanted them to differ from the laboratory-made temporaries. We discussed shade, shape and characterisation. After finalising the definitive restorations, the patient attended the practice for further treatment

8 ·    Facebow registration

·    Opposing arch alginate impression

·    Full arch putty impression for temporisation

·    Sectioning of the UR321 and UL123 temporary crowns, modification of the preparations and impressions for definitive restorations

·    Temporisation

9 ·    Fit of the definitive UR321 and UL123 crowns/bridges
10 ·    Facebow registration

·    Full arch putty impression for temporisation due to the new anterior definitive prostheses

·    Sectioning of the UR765 and UL45 temporary crowns, modification of the preparations and impressions for definitive restorations

·    Temporisation

11 ·    Fit of the definitive UR765 and UL45 crowns
12 ·    Review of definitive crowns/bridge

·    Impressions for a soft occlusal guard

13 ·    Fit of the soft occlusal guard

 

Outcome

All the patient’s concerns were dealt with during this case. We treated her marginally-broken down and carious crowns, improving her aesthetics dramatically. The prolonged time spent in provisional laboratory-made temporises allowed us to test the new occlusal scheme extensively. We also treated the TSL with additive minimally invasive direct composites and provided some protection to the new restorations.

 Reflections

This was my first full-arch reconstruction so it was very challenging, especially working in a mixed practice and needing to fit in the longer appointments into a busy book.  Acknowledgement should be given to Mr Nicholas Lewis for his guidance with this case. 

 Challenges

I was initially unsure whether to change all the crowns or just some as I always promote minimally invasive treatment. As one of the patient’s concerns was smile aesthetics, trying to match new and old crowns would have been problematic, so all crowns were replaced. It was also difficult to generate a mutually-protective occlusal scheme on the wax-up and we accepted a group function in the end. I feel this was mainly due to the near edge-to-edge relationship that the patient started with.

Finally, the laboratory-made temporaries were slightly bulbous in appearance, which was only acceptable due to the low lip line. While I did not reline them during the trial period, I would attempt to do this in future to aid the soft tissue contour and minimise black triangles with the definitive restorations. Remodelling in this region was unavoidable as we lost the UL1 early on.

Positives

My postgraduate education in restorative dentistry combined with having purchased the necessary equipment, gave me the knowledge and ability to complete this full-arch case. I was able to improve the patient’s situation and meet her expectations regarding aesthetics.

The TSL was treated in a minimally invasive way with simple additive composites, which is always better than tooth preparation and alternative restorative techniques. The provisional crowns also worked well and demonstrated a stable occlusal scheme that could be used for the definitive crowns.

In addition, the patient and her husband were very happy with the final result, as well as the time taken to plan and execute the case. They especially appreciated getting the ceramist involved to discuss shades and characterisation. As such, it has been a great case to add to my clinical portfolio and a fantastic practice builder.  

Images

Figure 1 – Pre-operative resting view

Figure 2 – Pre-operative smile

Figure 3 – Pre-operative maxillary arch

Figure 4 – Pre-operative mandibular arch

Figure 5 – Pre-operative retracted view

Figure 6 – Pre-operative mandibular incisal TSL

Figure 7 – Lucia jig and gothic arch tracing

Figure 8 – Mounted study models anterior view

Figure 9 – Mounted study models RHS buccal view

Figure 10 – Mounted study models LHS buccal view

Figure 11 – Diagnostic wax up anterior view

Figure 12 – Fractured LR1

Figure 13 – Fit of UR3-UL3 laboratory-made temporaries

Figure 14 – Rubber dam isolation for lower anterior build up LR3-LL3

Figure 15 – Build ups immediately after dam removal

Figure 16 – Full arch laboratory made temporaries

Figure 17- UR3-UL3 definitive Emax crowns/bridge

Figure 18 – Post-operative smile

Figure 19 – Full arch reconstruction using Ivoclar Emax crowns

 

For more information on 606 Dental, visit www.606dental.co.uk

 

Author:

Mr Daniel Caga

BSc (Hons), BDS (Hons/Clinical Dist.), Dip Rest Dent RCS (Eng.)

Qualified in Birmingham 2012 GDC: 228396

Daniel completed his undergraduate dental training at the University of Birmingham, having previously undertaken a BSc is Biological Science (Genetics) there. He graduated in 2012 with Honours and Distinction in Clinical Dentistry. During his undergraduate course he was awarded several prizes in topics including restorative and paediatric dentistry, orthodontics and oral surgery. 

After graduating he was chosen as the dental school’s Student Profile and was the nominated student to attend the first set of Vice-chancellor meetings at his university residence. Daniel still is a profile for the university’s Access to Birmingham scheme, which aims to encourage students from underprivileged backgrounds to attend the university; which is something he is most proud about.

Daniel successfully completed the prestigious 2-year postgraduate diploma in restorative dentistry (Dip Rest Dent) jointly awarded by the Faculty of General Dental Practice (FGDP) and Royal College of Surgeons (Eng.). He recently completed his MSc in Advanced Dental Clinical Practice at the University of Kent (awaiting external examination confirmation) and is undertaking further training/mentoring in dental implantology.


Join our
Mailing List

Sign up to our newsletter and keep up to date on the latest happenings in the dental market.

Sign up today