THE DENTAL AWARDS 2025 – REGISTER NOW!

Simultaneous upper and lower alignment with supported planning

Featured Products Promotional Features

  Posted by: Dental Design      2nd February 2021

A female patient presented as a regular dental attender. She had some crowding that she wished to correct in order to enhance both the appearance of her smile and access for cleaning. She had an existing no-preparation veneer on her upper left central incisor, which had always been in-standing. While she felt this had improved her smile aesthetics, she desired further improvement.

All the potential treatment options were discussed with the patient in detail, including fixed and removable orthodontic appliances. The patient was keen to use ClearCorrect® aligners (Straumann Group) due to their reduced visibility, improved comfort and easy removability for cleaning.

Assessment

The patient presented with 2mm of crowding in the upper arch and 4mm of crowding in the lower arch. The overjet measured 5mm at its largest site, with an overbite of 6mm. The patient had a mild skeletal class II division II base and molar relationships of full unit class II on both the right and left. The canine relationships were full unit class II on the left and half unit class II on the right, with a missing lower right first premolar, though the space had closed.

Treatment plan

An initial clear aligner treatment plan based on alignment of the upper and lower arches with 16 aligners was devised using IPR (interproximal reduction) and attachments where required. It would be necessary to accept the molar and canine relationships using this treatment technique, other than moving the UR3 to a full unit class II to match the contralateral side. The plan was to align the palatal surfaces of the upper centrals, before removing the veneer and refining the remaining tooth’s position as required or replacing it with a thinner veneer should the aesthetics of the surface of UL1 dictate.

A digital impression was taken using the Trios intraoral scanner from 3Shape, which was quickly and easily uploaded to the online portal. The technologies have been designed to integrate seamlessly for a super smooth and simple ClearCorrect® digital workflow.

A digital simulation of treatment was created from the ClearCorrect® online portal, indicating when and how much IPR may be required, as well as a guide for when to consider attachments. The software also provided a predicted end result so the patient could visualise her final smile, increasing treatment acceptance.

All the benefits, risks and limitations of treatment were explained to the patient in full. The importance of oral hygiene and compliance with wearing of the aligners for sufficient time each day were also emphasised. When she was happy to proceed, informed consent was obtained and the prescription for the first set of aligners sent to the laboratory. The Unlimited ClearCorrect® treatment option was chosen for this case due to the likely need to refine tooth positions after removing the veneer. This covered any number of aligners and/retainers needed (within 5 years) with no risk of any additional costs.

Treatment

Treatment advanced according to the plan, with 16 clear aligners worn by the patient over a total of 32 weeks. Engagers were placed on the UR1, UR3, LR2 and LL4. To create space for movement, 0.3mm of IPR was carried out between contacts LR34 and LL2345. More IPR was needed in the lower left quadrant to aid with centre-line alignment. Each aligner was worn for 2 weeks and the patient returned to the practice regularly so progress and oral health compliance could be reviewed.

During a refinement appointment, the UR1 veneer was carefully removed and the underlying tooth was found to be undamaged. A digital scan using the Trios was taken to fabricate a refinement aligner to allow for finishing improvements. When uploaded to the ClearPilot portal, the simulation indicated that minimal IPR may be needed to create space for the final tooth movements. The grid measurement feature and superimposition within the ClearPilot programme were invaluable with the fine-tuning of the position of UL1, ready for when the veneer would be removed.

To achieve these final adjustments, a further 5 ClearCorrect® aligners were planned over the next 10 weeks. At this time, the patient also completed a course of tooth whitening using Philips Zoom Nitewhite 16% carbamide perioxide for 2 weeks at night. The alignment and tooth whitening produced an aesthetic result that the patient was happy with. This, coupled with the fact that the existing veneer had been fitted without preparation on the natural tooth, meant that there was no need for a replacement. The existing veneer was therefore re-fitted.

Review

The patient was delighted with the treatment outcome, having enhanced the appearance of her smile as desired in a minimally invasive and efficient way. Luckily for this patient, pandemic caused only minor challenges. She was scanned for the refinement aligners just prior to the national lockdown in march 2020. Due to the inability to place in practice, we designed the refinement aligners to be attachment-free and delayed IPR until later in the process. This allowed the patient to continue wearing the refinement aligners during the pandemic and to keep treatment progressing.

Though the patient was very happy upon completion of alignment, she is currently considering some composite bonding, which I would perform using the Bioclear Method to reduce the black triangle caused by papilla loss between the central incisors.

I would encourage GDPs to tackle cases like this if they feel comfortable. A case with a restorative aspect like this gives an opportunity for one clinician to plan and follow a case through to completion. In this case, the patient consented for a new veneer should removing the existing no-preparation veneer (placed by another dentist) reveal an underlying tooth with poor aesthetics. Accounting for a replacement veneer and choosing the Unlimited ClearCorrect® package, as mentioned earlier, I planned for a worse-case scenario. In hindsight, we only required a relatively small refinement and did not require a new veneer after careful removal of the no-preparation veneer in place. However, the patient didn’t have to worry about potential additional costs despite everything going on, so the peace of mind may have been worth it in this case!

Images

Pre-operative anterior view

Pre-operative right lateral view

Pre-operative left lateral view

Pre-operative lower occlusal view

Pre-operative upper occlusal view

Pre-operative digital impression

Simulation of predicted result

Second simulation of predicted result post refining aligners

Post-operative anterior view

Post-operative right lateral view

Post-operative left lateral view

Post-operative lower occlusal

Post-operative lower occlusal

 

For more information on ClearCorrect®, visit: https://www.straumann.com/clearcorrect/en/home.html

 

Author bio:

Dr Mark Burton is a general dental practitioner with a special interest in Orthodontics. Since qualifying he has trained in numerous fixed and removable orthodontic systems and works in private practice at Cirencester and Stow on the Wold dental practices. He enjoys combining orthodontic treatments with minimally invasive dentistry to produce aesthetic results with a minimal disruption to tooth structure. Mark became a Key Opinion leader for ClearCorrectÒ last year and has since published and lectured about cases he has treated with the system.


Join our
Mailing List

Sign up to our newsletter and keep up to date on the latest happenings in the dental market.

Sign up today